6.11.6 Industrial Park (IP)
A. Uses
Use of this District shall require multiple buildings. Uses allowed in the IP District shall be limited to those uses listed in Sec. 5.1, Use Table.
B. Dimensional Requirements
1. Site Area
a. A minimum of ten contiguous acres shall be required for initial approval.
b. Additions to an approved IP District may be made in increments of any size.
2. Lot Area
No minimum lot area shall be required.
C. Transitional Use Area
A landscaped Transitional Use Area of at least 30 feet shall be established around the perimeter of the District and shall be shown on the development plan. If a buffer required pursuant to Sec. 9.4, Project Boundary Buffers, imposes a greater width requirement than the Transitional Use Area, the buffer requirement shall apply.
D. Height
The maximum height of any building shall be 90 feet, unless a taller building is identified on the development plan, in which case the maximum building height shall be 145 feet.
E. Yards
Other than the Transitional Use Area requirements, no yard requirements shall be established.
F. Sidewalks
Development plans shall indicate a continuous internal pedestrian system designed to permit ready access between all elements of the development.